10-18GHz 20W UWB RF Power Amplifier for Anti-Drone Systems
The 10-18GHz 20W UWB RF Power Amplifier for Anti-Drone Systems is a professional broadband solid-state RF power amplifier designed to deliver stable high-power output across the complete 10-18 GHz operating band. It combines high gain, efficient thermal transfer and practical control interfaces in a compact aluminum module for integration into demanding radio-frequency systems.
Unlike narrowband amplifiers that require separate hardware for every channel, this wideband PA provides flexible frequency coverage from one module. It is suitable for anti-drone jamming, UWB microwave transmission, radar signal amplification, laboratory RF testing and electronic countermeasure equipment. The 50-ohm RF path supports integration with standard signal generators, exciters, filters, combiners, antennas and monitoring equipment.
Key Advantages
- Wide frequency coverage: continuous operation across 10-18 GHz.
- High RF output: 20 W for reliable link-budget and countermeasure performance.
- High gain: 43 dB, reducing driver-stage requirements.
- Stable response: Ultra-wideband response for consistent power across the band.
- Industrial DC supply: 28 V DC with current consumption of 4.1-4.2 A.
- Thermal reliability: aluminum housing transfers heat to an external heatsink or forced-air cooling plate.
- System protection: Over-temperature and over-current protection.
- Standard RF connection: SMA female, customizable SMA/N type.
Technical Specifications
| Parameter | Specification |
|---|---|
| Frequency Range | 10-18 GHz |
| RF Output Power | 20 W |
| Power Gain | 43 dB |
| Gain Flatness | Ultra-wideband response |
| RF Input Power | 0 dBm |
| Supply Voltage | 28 V DC |
| Operating Current | 4.1-4.2 A |
| RF Connectors | SMA female, customizable SMA/N type |
| Dimensions / Housing | 80 × 60 × 16 mm |
| Weight | Compact aluminum module |
| Operating Temperature | -40°C to +65°C |
| Protection / Control | Over-temperature and over-current protection |
| System Impedance | 50 Ω |
Engineering and Integration
For optimum output power, mount the amplifier on a flat thermal surface with suitable heatsink capacity and forced-air cooling when required. Use a regulated low-ripple DC supply with adequate current margin. All RF ports should remain connected to properly matched 50-ohm components. The antenna, load, attenuator or combiner must be rated for the specified output power. Avoid operation without a load and keep input drive within the stated range.
The module can be integrated as the final RF stage after a frequency source, synthesizer or low-power driver. Optional filtering can be added at the output to meet system spectral requirements. Multiple modules may be installed in a multi-band platform, allowing independent control of different frequency ranges. Its compact format supports fixed stations, vehicle-mounted equipment, portable test systems and custom OEM assemblies.
Typical Applications
- Anti-drone and counter-UAS RF transmitters
- Electronic countermeasure and spectrum-control systems
- Broadband laboratory signal amplification
- Radar, telemetry and microwave test equipment
- Wireless communication research platforms
- OEM high-power transmitter integration
Ordering and Customization
Frequency range, gain, output power, connectors, supply interface, control logic and mechanical configuration can be adapted for OEM projects. Contact us with the required band, continuous-wave or pulsed duty cycle, input level, cooling condition and connector preference. Each module is tested for RF output, gain stability and electrical performance before shipment.
Contact
WhatsApp: +86 13260128857
Telegram: @uaboron
Hot Tags: 10-18ghz 20w uwb rf power amplifier for anti-drone systems, China 10-18ghz 20w uwb rf power amplifier for anti-drone systems manufacturers, suppliers, factory
