X-band solid-state RF power amplifier covering 10.7-12.7 GHz with 50 dBm (100 W) saturated output power and 50 dB gain. Built-in isolator protects the output stage against VSWR mismatch, and the 450 x 336 x 139 mm chassis runs from a 24-30 VDC supply. Waveguide WR75 output with N-type RF input suits satellite uplink, radar and commercial microwave transmission.
Technical specifications
| Parameter | Value |
|---|---|
| RF Frequency | 10 700 - 12 700 MHz |
| RF Input Power | 0 dBm |
| Psat Output Power | 50 dBm (100 W) |
| Power Gain | 50 dB |
| Power Gain Flatness | ± 1 dB |
| Temperature-induced Gain Variation | ± 1 dB |
| IM3 (two tones 10 MHz apart, 6 dB back-off) | -25 dBc |
| Input VSWR | 1.5 |
| Output VSWR | Built-in isolator for VSWR protection |
| Spurious Signals | -55 dBc |
| Power Consumption | 600 W @ saturation / 500 W @ linear |
| Operating Voltage | 24 / 28 / 30 V DC |
| In-Out Impedance | 50 Ohm |
| Dimensions (L x W x H) | 450 x 336 x 139 mm |
| RF Connectors (Input / Output) | N-KFD / Waveguide WR75 |
| Cooling | System-level heat dissipation |
| Mounting | phi 4.5-6 thru hole |
| Weight | <= 15 kg |
| Operating Temperature (Housing) | -20 to +60 C |
| Humidity Range | 0-95 % |
| Protections | Open circuit / short circuit / over temperature |
Applications
Satellite uplink and downlink chains, radar transmitters, microwave point-to-point links, EMC test benches and commercial X-band transmission systems.
Product images
Hot Tags: rf power amplifier 10.7-12.7 ghz, 100 w psat, 50 db gain, wr75 waveguide output for satellite and radar, China rf power amplifier 10.7-12.7 ghz, 100 w psat, 50 db gain, wr75 waveguide output for satellite and radar manufacturers, suppliers, factory
