Installing drone jammers at airports is a **professional and highly anti drone system secure systems engineering project**, which must strictly adhere to national laws and regulations and civil aviation industry standards. It can only be implemented by qualified entities; unauthorized individuals or organizations are strictly prohibited from operating it. The following are the core procedures and key requirements for compliant installation:
1. **Pre-approval and Qualification Confirmation**
- The airport must submit a written application to the **local Civil Aviation Administration, public security bureau, and radio management agency**, specifying the jamming system's model, coverage area, operating frequency band, installation location, and other core parameters.
- The selected drone jamming equipment must have passed the **National Radio Transmission Equipment Type Approval** and possess relevant civil aviation certifications. The use of uncertified "black flight" jamming equipment is strictly prohibited.
- The installation unit must possess relevant qualifications such as **radio engineering and security engineering**, and its technical personnel must be professionally trained and certified to work.
2. **Site Survey and Location Planning**
- In conjunction with civil aviation and radio management departments, conduct electromagnetic environment surveys of the airport's airspace, runways, and the area surrounding the terminal building to avoid interference between the jammer's signals and the airport's radar, communication, and navigation systems.
- Jammer installation locations must cover the **core airport control area** (runway landing pads, taxiways, terminal airspace, airspace above fuel depots, etc.), employing a "fixed base station + mobile gap-filling" layout to ensure no signal blind spots.
- Installation height and angle must be calculated using simulation to prevent signal leakage into uncontrolled airspace, affecting civilian communications or other legitimate wireless equipment.
3. **System Installation and Integration Testing**
- Fixed jamming base stations are typically installed on airport perimeter monitoring towers or navigation station auxiliary buildings, requiring adequate protection against lightning, wind, and electromagnetic interference. Mobile jamming equipment (such as vehicle-mounted and portable devices) must be equipped with rapid deployment and emergency activation devices.
- After installation, **full-band integration testing** is required: verifying the suppression effect on various UAVs (multi-rotor, fixed-wing, racing drones) and checking for interference with critical facilities such as airport radar, VHF communications, and instrument landing systems.
- Connect to the airport's **UAV defense command platform** to achieve anti drone system(interconnection/coordination) between the jammer and radar detection and photoelectric identification equipment, realizing closed-loop control of "detection-identification-location-jamming".
4. **Daily Management and Compliance Maintenance**
- Establish a **24-hour duty system**. The jammer must be in "standby activation" mode, only activating upon command from the command center after detecting an illegal UAV intrusion and failing to issue warnings or warnings.
- Regularly perform signal calibration and maintenance on the equipment. Conduct emergency drills quarterly in conjunction with relevant departments to ensure reliable operation of the equipment in emergency situations.
- Strictly record the jammer's activation time, duration, and effective airspace information, archive it for future reference, and accept regular inspections from civil aviation and radio management departments.anti drone system

